ESD Safe Carts & Chairs

ESD Carts

 
 

       Inquiries: e-mail: ESDcart@ESDcarts.net

 

A-MobileATC - Mobile ESD Safe, Stairs climbing transport cart

  • ESD safe stainless steel construction
  • Six ESD safe wheels for easy stairs climbing
  • Loading capacity 150 Ibs

ESD Safe Climbing cart_ok.jpg

A-MobileATC_1 - okM.jpg

ESD Safe Transport Cart - ATC-1

  • Depth 450 mm, width 650 mm, and height 775 mm
  • Loading capacity on top shelf: 50 kg
  • Total loading capacity: 150 kg.
  • All wheel tires are made from ESD- thru conductive material
  • Wheels diameter: Ø 75 mm, two non-rotating and two rotating with brakes. 

ATC-1 ESD Safe Cart random measurements of the empty car without the load

QC-Data Random check of ATC-1 before shipping to Distributors:
ATC-1 Factory Measurements at no load (worse case)
Measured with ZeroCharge Surface resistivity Meter A-400 or Static Solutions RT-1000 Megaohmeter. (Both available from Bomir Inc. www.bomir.com)
Conditions: Humidity 60% Temp: 25.3 Deg. C.
  A-400 RT-1000
Surface Resistivity: 1.00 x 10e3 1.34 x10e
Top shelve to metal plate under the wheel:    
Wheel1  1.00 x 10e5 5.20 x 10e4
Wheel2  1.00 x 10e5 6.70 x 10e4
Wheel3  1.00 x 10e5 1.00 x 10e5
Wheel4  1.00 x 10e5 7.70 x 10e4
Top shelve to metal plate under all four wheels:  1.00 x 10e4 2.30 x 10e4

The cart has on the upper part of the right/front leg a 10mm snap for grounding the cart at the parking station.
Six feet grounding coil cord terminated with a banana plug and an alligator clip is included with the cart.

The measurements were done as per ESD guidelines.

The ATC-1 was not loaded (No load = worse case measurement).

The ESD rubber wheels make better contact with the floor when the cart is loaded.


ESD Safe Transport Cart - ATC-1S

  • Depth 450 mm, width 650 mm, and height 775 mm
  • Loading capacity of the top shelve: 50 kg, total loading capacity 150 kg
  • All platforms are made of conductive reinforced ABS material
  • All wheels are made of ESD-conductive material
  • All wheels, Ø 75 mm, with swivel. One wheel with a brake
  • The cart has a 10mm snap for grounding the cart at the parking station on the upper part of the right/front leg. Six feet grounding coil cord terminated with banana plug and an alligator clip is included with the cart

ESD Safe Utility Cart - ATR-1

All metal cart with ESD wheels and ESD Rubber mat on the top shelve. This Utility Cart is designed to prepare and transport equipment, parts etc. to the assembly area. Makes a convenient mobile work surface for sorting parts, quick product repair, packing etc.

No burn, rubber mat top makes it soft for transporting delicate parts. Easy to clean and handy. When not in use for transporting, can be used as an extra shelf or table.

Features:

  • QualityESD carters
  • Convenient handle to pull or push
  • ESD non-burn rubber mat surface on the top shelve
  • Extra Middle shelve P/N: is ptional P/N

Contruction:

  • Epoxy powder coated steel
  • ESD Safe
  • Top covered with ESD, two layer rubber mat
  • Two shelves
  • Convenient handle for pushing or pulling.

The cart has a 10mm snap for grounding the cart at the parking station on the upper part of the right/front leg. Six feet grounding coil cord terminated with banana plug and an alligator clip is included with the cart.

Technical specifications:

Dimensions 24.4" L x 24.4" W x 27.6" H
(620 L x 620 W x 700 H mm)
Load capacity 400 lb.
(250 Kg)

Optional middle shelve

P/N ATR-MS shall be ordered separately


ESD Safe Cart ATR-1M

ESD Utility Cart. Conductive, no marking wheels. Top shelve finish: ESD, two layer non burn rubber mat.                                                           
Model ATR-1M has an extra middle shelf.
Otherwise, same performance as ATR-1.
ATR-1M.jpg

ESD Safe Cart ATR-1R

This cart was designed to prepare and transport equipment, parts etc. to the assembly area. It makes a convenient mobile work surface for folding, sorting or repairs.

It is also intended for placing on it laboratory equipment which needs to be mobile.                                                     

Features:

  • Large, non-marking ESD safe casters.
  • Convenient handle to pull or push
  • Static safe, non-burn rubber mat surface
  • 10mm grounding snap on the right side of the top shelf and a grounding coil cord to safely ground the cart at a parking station when used on not ESD safe floors.

Contruction:                                                                                                   

  • Epoxy powder coated steel.
  • Static safe.
  • Top covered with antistatic, two layer rubber mat.
  • Two levels for model ATR-1R.
  • Two rotary wheels. One with brake, on the front.
  • Convenient handle for pushing or pulling.

Technical specifications:

Dimensions 33.5" L x 23.6" W x 27.6" H
(850 L x 600 W x 700 H mm)
Load capacity 400 lb.
(250 Kg)

More Info

ATR-1R_OK_M.jpg

ESD Safe Cart ATR-1/306

The cart was designed specifically for X-Reflow306 Series Batch Ovens.

All metal cart with ESD wheels and ESD rubber mat on the top shelveextended to match X-Reflow306 ovens lengths. The middle shelve is spaced the way allowing sufficienthight to place on the cart X306 Fume extract.

The cart can be used to prepare and transport other equipment, parts etc. to the assembly area. Makes a convenient mobile work surface for sorting parts, quick product repair, packing etc.

Features:

  • Strong ESD casters
  • Convenient handle to pull or push
  • ESD non-burn rubber mat surface on the top shelve
  • A middle shelve to store extra accessories and equipment needed when using reflow ovens (e.g. data logger, thermocouples etc.)

Construction:

  • Epoxy powder coated steel
  • ESD Safe
  • Top covered with ESD, two layer rubber mat
  • Three shelves
  • Convenient handle for pushing or pulling

The cart has on the upper part of the right/front leg a 10mm snap for grounding the cart at the parking station. Six feet grounding coil cord terminated with a banana plug and an alligator clip is included with the cart.

Technical specifications:

Dimensions 24.4" L x 31.1" W x 27.6" H 
(620 L x 790 W x 700 H mm)
Load capacity 400 lb.
(250 Kg)

LOW COST HEAVY DUTY SERIES of ESD SAFE CARTS

ATC-2

Described below metal ESD Carts were designed to minimize the cost. They are all made of steel rods, chromium plated. Shelves connect to the four posts via made of metal, slightly conical split inserts to guarantee good path to the ground via wheels. Conducting wheels on ESD rubber tires guarantee current passage to the ESD safe floor. For transport of small parts the optional ATC-L ESD rubber mat, pre-cut shelve liners are offered to make solid flat surface of desired shelve.

ATC-2L= Set of liners for ATC-2 cart (Consists of 3 liners size 24”x30”)
ATC-2SL= Set of liners for ATC-2 cart (Consists of 2 liners size 24”x30”)
ATC-3L= Set of liners for ATC-2 cart (Consists of 3 liners size 18”x36”)
ATC-3SL= Set of liners for ATC-2 cart (Consists of 2 liners size 18”x36”)

The ATC-2 cart Consists of:

  • 3 pcs of 24"x30" Chrome-Plated Shelf
  • 4 pcs of 34" Chrome-Plated Post
  • 4 pcs of ESD Swivel PU Casters (2 pcs with a brake)
  • 1 pc of Handle, Chrome-Plated
  • sets of metal sleeves (12 for shelves and 2 for the handle)
  • ESD Shelve Liner Set ATC-2L(Green mats) is Optional

ATC-2S Two Level, Wide ESD safe Cart

Designed to minimize the cost. They are all made of steel rods, chromium plated. Shelves connect to the four posts via made of metal, slightly conical split inserts to guarantee good path to the wheels. Conducting wheels on ESD rubber tires guarantee current passage to the ESD safe floor. For transport of small parts the optional ATC2-L ESD rubber mat, pre-cut shelve liners are offered to make solid flat surface of desired shelve.

The ATC-2 cart Consists of:

  • 2 pcs of 24"x30" Chrome-Plated Shelf
  • 4 pcs of 34" Chrome-Plated Post
  • 4 pcs of ESD Swivel PU Casters (2 pcs with a brake)
  • 1 pc of Handle, Chrome-Plated
  • 14 sets of metal sleeves (12 for shelves and 2 for the handle)
  • ESD Shelve Liner Set ATC-2SL(Green mats) is Optional

ATC-3 Three Level Narrow Cart

The ATC-3 cart is similar to ATC-2 cart.
It is 6 inches longer and 18’ instead 24” inches wide
to facilitate movements in narrow passages.
It also has 2 handles, one on each side of the cart.

ATC-3 Consists of:

  • 3pcs of 18"x36" Chrome-Plated Shelf
  • 2 pcs of 34" Chrome-Plated Post
  • 1 pcs of 42" Chrome-Plated Post/Handle unit
  • 4pcs of ESD Swivel PU Casters (2 pcs with brake)
  • 1 pc of Handle, Chrome-Plated
  • 14 sets of metal sleeves to hold the shelves and handle
  • ESD Shelve Liner Set ATC-3L(Green mats) is Optional

ATC-3S Two Level Narrow Cart

The ATC-3S cart is similar to ATC-2S cart.
It is 6 inches longer and 18 instead 24 inches wide,
to facilitate movements in narrow passages.
Has also 2 handles, one on each side of the cart.

ATC-3S Consists of:

  • 2pcs of 18"x36" Chrome-Plated Shelf
  • 2 pcs of 34" Chrome-Plated Post
  • 1 pcs of 42" Chrome-Plated Post/Handle unit
  • 4pcs of ESD Swivel PU Casters (2 pcs with brake)
  • 1 pc of Handle, Chrome-Plated
  • 10 sets of metal sleeves to hold the shelves and handle
  • ESD Shelve Liner Set ATC-3SL (Green mats) is Optional

ATC-F4 Set of four feet (Optional)

ATC-F4 Set of four feet can be used with ATC2 and ATC3 Series of carts


ESD Safe Container Dolly - ADL-1

ADL-1 Container Dolly is made of strong, conductive and ware resistant high impact material. It is used to transport containers with PCB's, PCB Racks, parts etc. in ESD safe production environment. It is essential in every ESD controlled assembly area.

The trolley solves limited space in factory.

Containers can be simply piled-up the stored on the top of the trolley. Maximum number of containers piled up on top of each other should not exceed 10 pcs. Each trolley has one puller and four through ESD Casters. Two casters can rotate.

Technical specifications:

Outside Dimensions 25.8" L x 17.9" W x 1.4" H
(655 L x 455 W x 155 H mm)
Platform Dimensions 24.8" L x 16.5" W
(630 L x W 420 mm)
Load capacity 220 lb.
(100 Kg)



Quick Search

American Distribution

United States of America,
Canada and Mexico: 
BOMIR INC. (Master Distributor)
E-mail: bomir@bomir.com
Tel: (570)842-4725
Fax: (570)842-4290

Disclaimer

Bokar International is committed to continuing development of new products and improvements to existing products. Specifications are subject to change without notice.

2012 Design by GraphicSite STUDIO. All rights reserver.